Compare Devices for Meshtastic and MeshCore
Browse and compare devices for use on popular LoRa mesh networking technologies. Data set includes microcontroller, frequency support, power consumption estimates, interfaces, and other data as applicable(like battery chemistry).
Sort By
Categories
LoRa Frequencies
Firmware
Microcontroller
LoRa Radio
Price Range
Shows devices with any price overlap in this range
Min TX Power
Any TX power
Devices without a listed TX power are hidden while this is above 0.
Features
AtlaVox Beacon Solar Meshtastic Node
AtlaVox
Solar-powered Meshtastic node featuring RAK19007/4631 WisBlock 915MHz module, integrated 5W solar panel, IP67 aluminum enclosure, and versatile mounting options for outdoor use.
RAK19007 with RAK4631
RAKwireless
WisBlock modular LoRa node built with RAK19007 base board and RAK4631 core.
Mesh Node T114
Heltec
Low-power development board based on nRF52840 and SX1262, supporting LoRa and Bluetooth 5.0, with optional 1.14-inch TFT display and GPS module.
SenseCAP Solar Node P1 Pro
Seeed Studio
Solar-powered Meshtastic LoRa node with XIAO nRF52840 Plus MCU, integrated GPS, and 5W solar panel in an IPX5 enclosure for long‑term outdoor networking.
AtlaVox M1
AtlaVox
Compact, rugged Meshtastic node with based on the RAK19007/4631 with an integrated rechargeable LiPo battery. Optional GPS support available.
SenseCAP T1000e
Seeed Studio
Ultra-compact LoRaWAN tracker with GPS and BLE, rechargeable battery, and IP65 case.
T-Lora Pager
LilyGo
ESP32-S3 handheld with a 2.33-inch IPS strip display, full QWERTY keyboard, rotary encoder, GPS, and SX1262 LoRa. Runs Meshtastic, MeshCore.
WisMesh Pocket V2
RAKwireless
Fully enclosed LoRa node with display, battery, GPS, and SX1262 for plug-and-play Meshtastic use.
WisMesh Repeater Mini
RAKwireless
Smaller version of the WisMesh Repeater with external battery support and weather-resistant design.
T-Echo
LilyGo
Compact wearable LoRa communicator with GPS, microphone, speaker, and SX1262.
T-Deck
LilyGo
All-in-one portable ESP32-S3 device with keyboard, display, LoRa, and SX1262.
T-Deck Pro
LilyGo
ESP32-S3 based e-ink device with integrated keyboard, touchscreen, LoRa, and support for voice or 4G modules.
Thinknode M1
Elecrow
Meshtastic LoRa transceiver featuring nRF52840 microcontroller, GPS support, and 1.54-inch display, designed for outdoor communications and tracking.
RAK19003 with RAK4631
RAKwireless
WisBlock compact LoRa node built with RAK19003 mini base board and RAK4631 core.
3W Solar LTO Basestation
VoltaicEnclosures
A solar-powered LoRa base station designed for off-grid applications in extreme environments. Features special LTO batteries, charge controller, a 3W solar panel, and a robust enclosure for outdoor use.
Base Duo
Muzi Works
muzi works BASE System, nRF52840 and LR1121 dual-band 915M/2.4G, IO expansion for GPS, display, and standalone operation.
Base Station
Yeti Wurks
Repeater based around RAK19003 board supporting up to 4 18650 batteries. Optional solar panel.
Base Uno
Muzi Works
Custom muzi works BASE System, nRF52 and SX1262 radio with modular IO board add-ons.
BASENODE
Pacific Northwest 3D
The BASENODE is a compact and rugged complete Meshtastic® device built around the Heltec V3 LoRa board. It features a precision 3D-printed case, stainless steel screws, and a MakerFocus 2000mAh LiPo battery, delivering over 10 hours of runtime. Ideal for both stationary and portable off-grid use.
Canary One
Canary Radio Co.
"Rugged" handheld nRF52/SX1262, e-ink display, GPS, 24-72 hour battery.
GAT562 30s Kit
MTools Tec
30dbm(1w) board with built in filter. Comes with screen and GPS. Case optional.
GAT562 30s Mesh Solar Repeater
MTools Tec
30dbm(1w) open source design with ipex for both BLE and LoRa meant for solar installs.
H1
Muzi Works
A hand-assembled, ready-to-use Meshtastic® device featuring the Heltec V3 LoRa board. It includes a unique 3D-printed PLA Carbon Fiber case for enhanced grip and ruggedness, a stubby antenna, and a 1200mAh lithium-ion polymer battery.
H1 with External Antenna
Muzi Works
A hand-assembled, ready-to-use Meshtastic® device featuring the Heltec V3 LoRa board, enclosed in a unique 3D-printed PLA Carbon Fiber case for enhanced grip and ruggedness. It includes an upgraded whip antenna for improved performance and a 1200mAh lithium-ion polymer battery.
H2T
Muzi Works
A GPS-enabled Meshtastic® device powered by the Heltec T114 V2 board, featuring a unique 3D-printed PLA and PLA Carbon Fiber case for enhanced grip and ruggedness. Utilizing the power-efficient nRF52850 chipset, the H2T offers over 2 days of battery life with GPS enabled and maintains connectivity to the Meshtastic® app on your smartphone via Bluetooth Low Energy (BLE).
Ikoka Nano
Ikoka
Open Source DIY design requiring soldering components or custom order from JLCPCB
Ikoka Stick
Ikoka
Open Source DIY design requiring soldering components or custom order from JLCPCB
LoRa 32 V3
Heltec
Compact ESP32 LoRa development board with onboard OLED and battery management
LoRa T3S3
LilyGo
ESP32-S3 based LoRa development board with SX1262 and OLED display, supports external battery.
Mesh Node T096
Heltec
Dev board with nRF52/SX1262, GPS, Bluetooth, and 28dbm power.
MeshPocket Qi2
Heltec
A compact 6000mAh Qi2-compatible magnetic power bank designed for Meshtastic devices. Features MagSafe-style mounting, LED battery indicators, and both wireless and USB-C charging, making it ideal for portable and emergency use.
Meshtec B1
Meshtech
Meshtastic node based on RAK WisMesh B1 with SX1262 LoRa module and 2000mAh LiPo battery in a custom enclosure.
MeshTower V2
Heltec
Outdoor solar powered mesh node with a 10w solar panel, 3 18650 batteries, and up to 1w transmit power.
Nano G2 Ultra
B&Q Consulting
Handheld built on nRF52, internal antenna with up to 3.5 days of battery life.
NOMAD Device w/ Meshtastic®
Pacific Northwest 3D
The NOMAD device is built tough for adventures, securely housing a Heltec V3 LoRa board within a precision-crafted rugged case. It features a MakerFocus 2000mAh LiPo battery, providing over 10 hours of battery life for extended off-grid use.
Pocket-S
LowMesh
A compact, ruggedized solar-powered Meshtastic node built around the T-Echo, featuring an e-ink display and durable 3D-printed enclosure.
R1
Muzi Works
A compact, ready-to-use Meshtastic device featuring a unique 3D-printed PLA Carbon Fiber case, designed for portability and multi-day battery life. It includes internal PCB antennas and is powered by the RAKwireless WisBlock RAK4631 module.
R1 with External Antenna
Muzi Works
A compact, ready-to-use Meshtastic device featuring a unique 3D-printed PLA Carbon Fiber case, designed for portability and multi-day battery life. It includes an external whip antenna for enhanced range and is powered by the RAKwireless WisBlock RAK4631 module.
SenseCAP Indicator
Seeed Studio
Smart display and controller for IoT applications, supports WiFi, BLE, LoRa via WM1110 module.
Spec5 Beacon
SpecFive
A solar-powered LoRa radio device designed to extend mesh network coverage in outdoor or remote settings. It features an integrated solar panel that prolongs battery life by 1 to 2 days under optimal sunlight conditions, ensuring consistent operation during extended activities.
Spec5 Copilot
SpecFive
The Spec5 Copilot is a personal LoRa assistant designed to transform your drone or unmanned aerial system (UAS) into a mobile LoRa antenna tower, significantly extending your network's range. Equipped with GPS tracking, it monitors the position of your UAS, ensuring you can track its location even if the drone's battery depletes.
Spec5 MeshClip
SpecFive
A portable LoRa device designed for ultimate convenience and mobility. Its compact design includes a steel ring, allowing it to be magnetically attached to the back of your phone for seamless on-the-go communication. The MeshClip operates within a LoRa mesh network, enabling users to send text messages and share GPS locations.
Spec5 MiniTrekker
SpecFive
A compact LoRa radio device that delivers powerful off-grid communication capabilities in a pocket-sized form. Its durable PETG case and integrated clip make it easy to carry during hikes or outdoor missions. Designed for simplicity, it provides text messaging and GPS location sharing over a LoRa mesh network.
Spec5 Nomad
SpecFive
A versatile LoRa communication device built around the Raspberry Pi 5, designed for off-grid explorers and emergency scenarios. The Nomad provides reliable mesh networking capabilities including text messaging and GPS location sharing, packaged in a rugged PETG case with a high-resolution touchscreen for easy operation.
Spec5 Ranger
SpecFive
The Spec5 Ranger combines advanced LoRa communication with user-friendly hardware to meet the needs of outdoor enthusiasts and network builders. Featuring a touchscreen and a navigation ball for precise control, it allows users to manage their LoRa mesh networks with ease. It also comes with a full QWERTY keyboard allowing for use without the need to connect to your phone.
Spec5 Relay
SpecFive
A solar-powered Meshtastic LoRa relay system designed for autonomous operation as a relay station. Built for rugged, permanent installation on poles, buildings, or towers, it ensures reliable communication in remote areas or expansive networks.
Spec5 Spectre
SpecFive
The Spec5 Spectre is a versatile LoRa radio designed for secure communication and navigation. Featuring two-way voice communication, it allows real-time interaction with your group over off-grid channels. Its LoRa mesh network ensures reliable text messaging, enabling seamless coordination in remote areas. With an intuitive touch interface and extended battery life of up to 8 hours, the Spectre is a reliable companion for adventurers and network builders seeking advanced connectivity tools.
Spec5 Trekker
SpecFive
A portable LoRa radio designed for off-grid explorers and communication enthusiasts. It offers GPS location sharing and text messaging through a robust LoRa mesh network, providing reliable connectivity even in areas with no cellular coverage.
Spec5 Trekker BRAVO
SpecFive
An enhanced version of the original Trekker, the Spec5 Trekker BRAVO offers reliable LoRa network integration for text messaging and precise GPS location sharing. It includes a high-gain antenna for extended range and improved signal clarity, making it ideal for adventurers seeking uncompromised performance.
Spec5 Trekker Utility
SpecFive
A high-performance LoRa radio designed for users requiring extended functionality. It offers enhanced battery life, built-in environmental sensors for real-time data, and an integrated speaker for audible alerts, ensuring reliable communication during extended off-grid activities.
Station G2
B&Q Consulting
High power (37dbm) amplifier with an inline LNA node that requires USB PD input.
T-Beam Supreme
LilyGo
High-performance LoRa development board with ESP32-S3, GPS, and SX1262.
T-Beam V1.1
LilyGo
ESP32 LoRa device with GPS, SX1272, and 18650 battery holder.
T-Deck Plus
LilyGo
ESP32 powered node with a full keyboard, color screen, and metal case.
T-Lora C6
LilyGo
ESP32-C6 board with SX1262 LoRa support and external antenna interface.
T-Watch
LilyGo
ESP32-based smartwatch development board with touch display and Bluetooth/WiFi support.
Thinknode M2
Elecrow
Handheld ESP32/SX1262 radio, 1.3-inch OLED display, 1000mAh battery.
Thinknode M3
Elecrow
Tiny weatherproof tracker style radio with tie off and internal antenna
Thinknode M5
Elecrow
Pocket sized radio with an e-ink screen and external SMA antenna. Available in both nrf52 or esp32.
Thinknode M6
Elecrow
Radio with a 6w solar panel with 7000mah battery. SMA connectors for both LoRa and Bluetooth.
Vision Master E213
Heltec
E-Ink development kit with multiple wireless communication methods, featuring a 2.13-inch black and white E-Ink display.
Vision Master E290
Heltec
E-Ink development kit with multiple wireless communication methods, featuring a 2.90-inch black-and-white E-Ink display.
Vision Master T190
Heltec
Development kit featuring the ESP32-S3 microcontroller with optional LoRa module and a 1.9-inch TFT-LCD display.
WiFi LoRa 32 V4
Heltec
DIY Board with optional OLED display based on an ESP32 controller and SX1262 radio.
Wio SX1262 with XIAO ESP32S3
Seeed Studio
Ultra-compact LoRa development board combining the XIAO ESP32S3 with an onboard SX1262 module for wireless communication.
Wio SX1262 with XIAO nRF52840
Seeed Studio
Ultra-compact LoRa development board combining the XIAO nRF52840 with an onboard SX1262 module. The low-power nRF52 chipset makes it ideal for battery-powered nodes.
Wio Tracker 1110
Seeed Studio
LoRa-enabled development board based on WM1110 with onboard GNSS and BLE, ideal for asset tracking.
Wio Tracker L1 E-Ink
Seeed Studio
L1 with an e-ink screen, GPS, and antenna.
Wio Tracker L1 Pro
Seeed Studio
L1 with a case with a switch, buttons, and joystick for navigation.
Wio-WM1110 Dev Kit
Seeed Studio
Development kit based on the WM1110 module with BLE, GNSS, and LoRa support for prototyping location-based solutions.
Wireless Paper V1.1
Heltec
E-Ink development kit with multiple wireless communication methods, featuring a 2.13-inch black and white E-Ink display.
Wireless Stick Lite V3
Heltec
Compact ESP32-S3 board with WiFi, Bluetooth, and LoRa support in a breadboard-friendly form factor
Wireless Tracker V1.1
Heltec
Compact ESP32-S3-based LoRa GPS tracker with RGB TFT display and support for external lithium batteries
WisMesh 1W Booster Starter Kit
RAKwireless
A 1w booster for the popular RAK 19003/7 boards.
WisMesh Board ONE
RAKwireless
Bare development board for Meshtastic projects with SX1262 and ESP32.
WisMesh Ethernet MQTT Gateway
RAKwireless
LoRa to MQTT gateway with Ethernet connectivity for permanent Meshtastic installations.
WisMesh Repeater
RAKwireless
Fully enclosed solar-powered repeater for Meshtastic networks, built for long uptime and range.
WisMesh Tag
RAKwireless
A waterproof card sized radio with GPS and internal antenna.
WisMesh Tap
RAKwireless
USB-powered LoRa node with SX1262 for always-on desktop Meshtastic communication.
WisMesh WiFi MQTT Gateway
RAKwireless
WiFi-connected MQTT gateway to bridge LoRa networks with the cloud.
Missing a device?
Know a device that should be listed here? Suggest it and we will add it.